How To

How To Jumpstart A Car

×

How To Jumpstart A Car

Share this article
How To Jumpstart A Car

How To Jumpstart A Car

How to Jumpstart a Car: A Comprehensive Guide

Introduction

A dead car battery can be an unexpected and frustrating inconvenience. It can happen at the most inconvenient times, leaving you stranded and unable to continue your journey. However, jumpstarting a car is a relatively simple procedure that can be performed by most people. This guide will provide you with step-by-step instructions on how to jumpstart a car safely and effectively.

Safety Precautions

Before you begin the jumpstarting process, it is important to follow these safety precautions:

  • Park both vehicles close together, but not touching.
  • Engage the parking brake on both vehicles.
  • Turn off all electrical accessories, including the ignition.
  • Do not smoke or stand near the battery as it can emit hydrogen gas, which is flammable.
  • Wear eye protection as battery acid can be harmful if it comes into contact with your eyes.

Materials You Will Need

To jumpstart a car, you will need the following materials:

  • Jumper cables
  • Another vehicle with a working battery

Step-by-Step Instructions

  1. Connect the Red Cable: Attach one end of the red jumper cable to the positive terminal (+) on the dead battery. The positive terminal is typically red.
  2. Connect the Other End of the Red Cable: Connect the other end of the red jumper cable to the positive terminal (+) on the working battery.
  3. Connect the Black Cable: Attach one end of the black jumper cable to the negative terminal (-) on the working battery. The negative terminal is typically black.
  4. Connect the Other End of the Black Cable: Connect the other end of the black jumper cable to a metal surface on the dead car, such as the engine block or frame. Do not connect it directly to the negative terminal on the dead battery.
  5. Start the Working Vehicle: Start the engine of the working vehicle and let it run for a few minutes. This will charge the dead battery.
  6. Attempt to Start the Dead Vehicle: Try to start the dead vehicle. If it does not start immediately, wait a few more minutes before trying again.
  7. Disconnect the Jumper Cables: Once the dead vehicle has started, disconnect the jumper cables in the reverse order of how they were connected. First, remove the black cable from the metal surface on the dead car, then remove the black cable from the working battery. Finally, remove the red cable from the working battery and then from the dead battery.

Tips for Success

  • Make sure the jumper cables are securely connected to both batteries.
  • If the dead battery is completely discharged, it may take several minutes of charging before the car will start.
  • If you are unable to start the dead vehicle after several attempts, there may be another problem with the vehicle. Consult a mechanic for further assistance.

FAQ

Q: What type of jumper cables should I use?

A: Use jumper cables that are at least 10 feet long and have a gauge size of 4 or 6 AWG (American Wire Gauge).

Q: Can I use jumper cables from my truck to jumpstart my car?

A: Yes, as long as the truck has a 12-volt battery and the jumper cables are the correct size and type.

Q: What if the dead battery is located in the trunk?

A: Most vehicles have a positive (+) terminal under the hood that is connected to the battery. You can use this terminal to connect the red jumper cable. For the black cable, locate a metal surface in the trunk that is not painted or coated.

Q: Can I jumpstart a car with a completely dead battery?

A: Yes, but it may take longer and the working vehicle may need to run for an extended period of time to charge the dead battery.

Q: What should I do if my car won’t start after jumpstarting?

A: If your car still won’t start after jumpstarting, there may be another problem with the vehicle. Check the battery terminals for corrosion, inspect the alternator belt, and consult a mechanic for further assistance.

Conclusion

Jumpstarting a car is a straightforward procedure that can be performed by most people. By following the steps outlined in this guide and observing the safety precautions, you can get your dead car back on the road quickly and safely.